Blog Archives

{Kitchen Update} DIY Iron Pipe Gallery Wall

Happy Monday friends. I hope you had a good weekend! I got our taxes done, binged watched House of Cards (omg!)and enjoyed the sunny weather…I’ll call the weekend a success!

As promised last week, I wanted to share the update I made to the kitchen. We haven’t moved forward with any lighting projects, but the tips I got from Carmel and her readers are definitely setting things in motion. And, this project will actually influence lighting decisions…now a chandelier is in the mix.

 GWall2

GWall1

I’d been trying to sort out what to do on the long wall behind our kitchen table. I kicked around a gallery wall and then read that picture ledges are the new gallery wall, which I loved, for 5 minutes. Then, I imagined all the head and should bonks on the ledges as people walked to their seats or stood up. Ledges were out.

Screen Shot 2016-03-07 at 6.28.33 AM

Then, I was out to dinner in Syracuse at this restaurant that looked like Joanna Gaines had decorated it. With the exception of a random fake tree in the middle of the room, they had some awesome decor. I noticed a gallery wall of pictures hanging from an iron pipe. Y’all know how much I love iron pipe decor. Sold! 

AsterPantryGalleryWallSource


I went on a wild goose chase looking for the same black pipe Larry and Tim used to build my bookshelves. All the hardware stores only had super black iron pipe (too black) or galvanized steel pipe (too silver). It wasn’t until after I went to two different stores that I called TimTheFarmer and learned that when they washed the grease off the super black iron pipes, they also lightened the color. Ugh. #lessonlearned 

GWall3

I was so excited to do this project that while dinner was in the oven, I scrubbed down the pipes in kitchen sink #keepingitclassy. I just used dish soap and one of those green scrub pad things. How wild is the color difference?

GWall4 GWall5

I assembled the pipe pieces and TimTheFarmer helped me figure out where to put the anchors in the wall for a level hang. #yayforhusbands Then began the never-ending process of installing the anchors.

GWall6

It was at this time that TimTheFarmer informed me that he’s figured out our relationship. According to him, I’m the chef, and he’s my sous chef  – – prepping everything for me to finish the project. Does that mean he’s calling me bossy? Probably. I sort of am though. #IllBeYourSousChefTooHoney

Once the anchors were in (and I ran back to the hardware store because we discovered the anchor screws were too small and slipped through the pipe mounts – which I fixed my getting little washers), we hung the pipe. Using, of course, my new hot pink drill from my dad. I then went around the house collecting items to hang from the pipe. I’d picked up an assortment of things I hoped would help with hanging (clear picture hanging wire (basically thick fishing line), ribbon, a wreathe hanger, etc.) and crossed my fingers. 

GWall7

This project did involve dismantling the picture frame wall I showed you last week. I have a piece coming for that wall, which is why I was OK taking the wall apart. Stay tuned! I used the same technique and laid out my plan on the kitchen floor.

GWall8

As I set out to figure out how the heck to hang all this stuff, I thanked my dad (in my head) for making me tie on my own fishing hooks for all those years – that knot came in handy with the clear picture hanging line. To minimize my knots, I looped the line around the bar and then tied it to the object being hung. The objects were floating a bit, so I used some good ol’ ticky tack to stick them to the wall. On the flamingo I used the 3M velcro mounting strips because the ticky tack couldn’t hack it.

GWall10

Side note on the flamingo. I had an Audubon calendar a few years ago and saved it (#hoarder) for future decor projects. See honey, there is a reason I keep all this crap. I cut the calendar up and put this picture in a frame. The flamingo was the only picture I wanted to look at while eating. Unlike this one, which one freaks me out.

GWall13

Insider Tip: I liked how the hangers looked more intentional in the inspiration wall in Syracuse, but I have no idea what those hangers are. So, I hung everything with the clear line. Then, I used more ticky tack to stick a glittery burlap ribbon to the line to make it look like it was hung with ribbon. 

GWall9

GWall11

And….here’s the finished product!

GWall12

I’d like to figure out an easier hanging method so I can switch things out seasonally. I love the idea of switching out the flowers depending on the season, too.

And, what are your thoughts on a wedding picture in your kitchen/dining area? I love this picture – it’s really a work of art from Casie Zalud. But, is it too personal for a dining/community space?

GWall14

Project Sources:

Pipes: Lowes/Home Depot/Ace Hardware 
B: Michaels
Picture frame: thrifted find
Dalias: Michaels
Antique blue mason jars: thrifted find
Bird: I have no idea – I’ve had that for years. 
Flamingo print: page from Audubon calendar in a frame we had
Picture line, ribbon, ticky tack: Michaels



{Living Room} How to Hang A Picture Frame Gallery Wall

Update: Kim sent me a picture of the picture frame gallery wall at Panzur and I inserted it below.

Oh my goodness! It has been so fun to see everyone come through from Our Fifth House – thank you for your sweet emails! I have gotten so many great ideas from all the comments on Carmel’s post about our kitchen lighting dilemma. For today’s post, I’d planned to show you the project I did this weekend in the kitchen, but a reader noticed our the picture frame gallery wall in this post and asked about it – it’s a post I’ve meant to do for a while, so since that project preceded the kitchen project, let’s start there! 

GalleryWall1

To start at the very beginning, a few years ago our favorite restaurant put in a new installation where they hung empty picture frames layered on top of each other along a whole wall. I LOVED it – Kim is super creative and artisitc – and hoped to do one of my own someday.  

Panzur

To start, I knew I’d need some cool, vintage (read: old) picture frames. In anticipation of moving into a bigger home, we spent a fair amount of time last summer poking through flea markets and little local antique stores. Well…I would actually call them picker or junk stores because they’re not fancy curated antique shops, which is perfect because things are a little more dusty, beat up, and inexpensive – exactly what I wanted! It was funny because most of the sellers couldn’t believe I wanted old beat up frames and would give them to me for free or just a few dollars. My favorite find was this turquoise frame from Mexico, part of a great day’s haul from a big flea market (see what I did with the antique scale here). 

ThriftingFInds

After painting the whole loft, stairwell, and entry/living room, I was determined to get a few decorations up before our Second Thanksgiving feast. That morning I got out all my old frames and knew I’d need a few smaller ones to offset the three large ones I’d picked up. I’d bought a bunch of distressed white and light blue frames from Michaels (or HomeGoods…I think it was HomeGoods) a few months before and thought they’d fit in the with old frames. I removed their glass and backing which I stored safely in a box in the basement for if/when I wanted to use the frames for actual pictures. Tip: pick frames with similar colors to pull the wall together – in my case I went with antiqued blacks/grays and turquoise.

One lesson I learned when Jesse helped me with my first gallery wall was to lay out your whole plan on the floor, before you commit to holes in the wall. That’s the kind of planning that would never cross my mind and I use it all the time now! So, I laid them out in a few different patterns on the floor until I got the arrangement I liked. Then, I took a picture so I could reference it once I started hanging the frames.

WallPlan

To hang them, I started with the two largest frames that were to be flush to the wall and used little picture hanging nails (one or two nails depending on the mounting hardware the frames came with). Because they’re empty, the frames are super light, so I didn’t worry about finding studs (insert TimTheFarmer saying, “Plus you already found one.”). To hang the pictures the frames that were floating, I used longer picture nails which I only hammered in a little (enough to hold the weight, but far enough out to keep the frames off the wall). To keep them from getting wonky, I put a nail in behind the floating corners of the frames to keep them off the wall and fairly level/flush. The frame just rests on the nail in the bottom corner. Finally, to keep everything fairly level since there’s a fair amount of balancing going on, I stuck 3M mounting strips between the frames to hold them all together. I checked the straight lines both visually and with a level, and then accepted that they might be a teense off in places (let your OCD go, folks). I made a handy dandy nail (in pink) and 3M strip (in green) map below. The curvy arrow is the floating support nail. Let me know if it’s helpful or super confusing!

WallNailMap

I’m not a big fan of whoever placed that darn thermostat in the middle of the wall (which we’ve since replaced with an even bulkier one I have to work around…but it saves us heating oil!), but I did take that into account when working on the layout. 

GalleryWall2

Also, I picked up the vintage ironing board and metal pot at one of those junk stores and the white table at a garage sale. I love all the old stuff you can find living on the East Coast! The metal buckets are from our wedding (from JoAnn Fabric) and the flowers are from Michaels.

GalleryWall3

To summarize the tips:

1. Gather your supplies: empty frames, 1 and 2 inch picture hanging nails, 3M mounting strips, hammer, and level.

2. Lay out your gallery wall on the floor, rearrange until you get a layout you like, and take a picture.

3. Start with hanging your largest pieces first that will be flush to the wall. Hang with smaller picture nails. 

4. Float your next round of frames by using longer picture nails that will keep the frames off the wall. Hammer your nails in enough to hold the frame, but leave enough extra to be above your first level of frames. Add a second nail in the wall at the bottom corner of your frame for your frame to rest on to keep it floating.

5. Take a step back and then use a level make sure the frames are generally level. Keep the frames from sliding on each other by sticking them together with 3M mounting strips. 

6. Cross your fingers that you’ve secured everything well enough that the teenager and dogs running through your house don’t make the frames wonky (luckily I did!).

Have you tried a picture frame gallery wall? Any tips to add?